GE WSLS1100 Owner's Manual & Installation Instructions page 16

Installation Instructions
WASHER CONNECTIONS FOR PORTABLE MODEL
WSLP1100--TWO-FAUCET CONNECTIONS
]f }_O/I
have tw() separate _3Jtei" connections_
yO/lI"
washer
can be connected to both the hot and cold water faucets.
This kit can be purchased fl'om your dealer
or fl'om Parts
and Accessories. In the United States, call 800.626.2002.
In Canada, consult the yellow pages tin" yore" local Camco
n/in/bei-
TO CONNECT THE WASHER:
IllCONNECT TO WATER LINE
Connect HOT and COLD water inlet hoses to the
HOT and COLD faucets.
12ICONNECT DRAIN HOSE
Secure tile drain hose to tile sink or stand pipe.
Cable
Tie
CableTie
Sink
Stand Pipe
[] PLUG THE POWER CORD INTO A
3-PRONG GROUNDED OUTLET
[] INSTALLATION CHECKLIST
Before starting the washer, check to make sure:
UJMain power is turned on.
The washer is plugged in.
The water timcets are turned on.
The unit is level.
The drain hose is propedy tied up.
There are no leal_s at the timcet, drain line
or washeE
TO DISCONNECT THE WASHER:
I[_ TURN WATER FAUCETS OFF
I
12IUNPLUG POWER CORD AND
RETURN IT TO THE STORAGE
AREA
[] DISCONNECT THE DRAIN AND
WATER SUPPLY HOSES
Hang them on tile storaoe rack.
16