GE WSLS1100 Owner's Manual & Installation Instructions page 5

About the controland indicator settings, ge.com
CLOTHES CARE CYCLE SELECTION
• PRESOAK • EXTRA LARGE
NORMAL
WASH • LARGE
• RINSE ONLY • MEDIUM
• SPIN ONLY • SMALL
• COLORS • HOT/COLD
• WHITES • WARM/COLD
• DELICATES • COLD/COLD
• QUICK WASH
TIME
REMAINING
MIN
• LOAD SENSING
Before starting the washer:
• I,oad the laund_' in the washer.
• Add the detergent and tiff)tic softener to the dispenser drawer.
• Add bleach (if needed) to the bleach dispense_:
ToUseAutomatic One-TouchWashing
The LOADSENSING
featm'e automatically senses the size of yore" load, fills with the ai_i)ropriate
amount of water and calculates the amount of wash time required to complete the cycle.
NOTE:
When using the
LOADSENSING
flmmre, it is nomml fi)r the agitator to rotate heft)re water fills
in the basket.
To choose the automatic LOAD SENSING feature, press POWER ON/OFF.
The fl)llowing indicators will light up automaticallv: NORMAL WASH, LOADSENSING and COLD/COLD.
Then simply press
START/PAUSE
ToChoose YourOwn CycleSelections
_r_ POWER ON/OFF
Press the
POWER
ON/OFFbutton to tm'n on the control panel.
D WASH OPTIONS
Choose the wash options )ou would like to include in the c) cle. Press the
WASH OPTIONS
button until all the options you want to include are lit. More than one option can be selected.
PRESOAK Forheavilysoiledclothesthat needto be soakedbeforewashing.This optioncan be usedas
partof the WASH C¥CLEyouselect.
NORMAL This option is automaticallyselectedwhenyou pressPOWERON/OFE
WASH
RINSEONLY This optiongives one rinsecycleonly. Forexample:Usethis cyclewhenyou needto remove
excess detergentfrom yourclothing.
SPIN ONLY This optiongives one spincycleonly.Forexample:Usethis cyclewhenyou needto remove
excess water from yourclothing.