Coleman 3000 SERIES Assembly Instructions Manual page 14

Assemblethe CYLINDER(79) to the Cylindercaddy.See detail 12.A.
Placethe CYLINDERRETAINERWIRE(77) over the CylinderCollar. See detail 12-B
AttachingTYPE 1 fi_ng to the fuel outlet valvein detail 12-C
12-A Set CYLINDER(79) in the cylindercaddy with
the outlet valve facingthe front of the grill
IMPORTANT!
TO ENSURE PROPER GAS FLOW, BURNER
CONTROL VALVES MUST BE
"OFF"
BEFORE
OPENING THE GAS CYLINDER VALVE.
77
Leffend
12-B Placethe CYLINDERRETAINER WIRE (77)
over the Cylindercollar, by rotatingthe wire
from the originalpositiontowardthe cylinder
collar.
/_ WARNING: Duringassemblyof
grill and when attachingor replacingthe
L.P. gas cylinder,insurethat the gas
supply hoseis free of Idnksand/or
damage and is at least 3" away from hot
surfacessuch as the grill casUng.
27
79
12-C Insertthe TYPE 1 nipple of the regulator(27)
into the cylinder'sfuel valveoutletas shown.
Turntheregulator h andwheelclockwise to
tighten,Notoolsare needed. The Hand
wheelwillcome to a completestopwhenthe
connectionis secure and gaswillnotflowuntil
a positive seal is achieved.
11412077AX { Pg.14)