Coleman 3000 SERIES Assembly Instructions Manual page 16

;i__,:.._. -_ =# Assemble the IGNITERWIRES(lead ELECTRODEWIRES (29) and Side burnerwires), SWITCHWIRES (26) and the 9-VOLT
BATTERY(30) in details 14-A.
Assemblethe ELECTRONICMODULE(28) in detail 14-B.
ELECTRONIC MODULE
9-VOLT
BATTERY_[0
ELECTRONIC
MODULE 28
\
WIRE
29
GLUE
StDE
3URNER
ECTRODE
WIRES
26
TEST THE iGNITER:
A
SPARKSHOULDAPPEAR
AT ELECTRODETIP.
iF THE SPARKDOES NOT APPEAR:
CHECK THE WIRE CONNECTIONS TO THE
MODULE.
CHECK PROPERASSEMBLYOF FRESH9-
VOLT BATTERY.
LEFT SIDE OF GRILL
14-A.Attach the blackSWITCHWIRES (26), withthe
red connecters locatedon the left side of your
grill, to the two large pins on the ELECTRONIC
MODULE(28). Then attach the two orange
lead ELECTRODE WIRES (29) to the pins on
the modulemarked 1MB and 2MB and the two
blue Side BurnerElectrodewiresto the pinson
the modulemarked 1SB and 2SB.
_, Insertthe 9-VOLTBATTERY(30) in the
module,it MUSTsnap in place.
/_, Caution: Insurethat the wires DO NOT
touch hotsurfacessuch as the grill casting.
Hardwareshown actual size
(3201 0199)
10-24 X 112"
(2) Qty.
28 Left front
side of
grill
14-B.Locatethe front SIDE BRACKET(13) and
attach theELECTRONICMODULE(28)
underneaththe front bracketflange in the
holes indicatedwith two screws(,IS).
=_ Bundleextra wire length with wire tie (I.A) not
shown.
Mounting Holes Detail
Frame Side Frame
Module
Outside
Tool Bar Top View of Bracket (13) Tool Bar
11412077AX(Pg. 16)