Coleman 3000 SERIES Assembly Instructions Manual page 17

Hide thumbs Also See for 3000 SERIES:

Step

151

11412077AX ( Pg. 17)

Assemblethe SIDEBURNERVALVE(27) in detail 15-A.

Assemblethe SIDE BURNERGRID (41) and the SIDE BURNERCONTROL KNOB(40) onto the Side burner.See detail 15-B.

15-A. Attach the SIDE BURNERVALVE(27) (located on

the HoseNalve/Regulator assemblyattachto the

controlpanel) to the BASEwith two screws(HA).

Note: the Side burner hose must be thread between

the left legs, not in front of the left leg.

Z_ WARNING:

The orifice must be insidethe

venturitube.

Hardwareshownactual size

(3250 0105)

#e-32 x 3/8"

(2) Qty.

15-B. Set the SIDE BURNER GRID (41) tabs into

the slots on the Side Burner base and turn

the grid until it stops. Note: Before each use

turn the Side Burner grid to insure that it is

secure.

=:_

Push the SIDE BURNER CONTROL KNOB

(40) onto the Side BurnerValve stem.

Table of Contents