Adjusting The Timing Of The Needle And The Shuttle Hook (Shuttle Hook Position) - Brother VX1140 Instructions Manual

S. ADJUSTING THE TIMING OF THE NEI_DLE AND THE SHUTTLE HOOK (SHUT-
TLE HOOK POSITION)
STANDARD
,Vhen hes chwdhknob sse a '5 and heneedle s asedon heJef sdeavl,7 o2.1mmfrom[tsrowestpos o ,thesh ttlehook
Joint should align with the side af the needle.
_DJUSTMENT
:. Set the stitch width knob to "5", then lower the need]e to its [o_,esl poskion at the left side of the needle plate.
2. Loosen the set screw on Lhedrive connecting rod.
5. Raise the needle between l.T and 2.1 mm andaligntheshuttlehookpointwiththes[deoftheneed[e.
n Tighten the set screw.
©
CB[It _r
Left
@,
mlrl
-8-