GE Profile PVM1790 Owner's Manual page 18

About the baking and roasting features.
Correct shdf position
Incorrect shdf position
Baking or roasting uses a heating element to raise the temperature of the air inside the oven.
Any oven temperature from 225% to 450°F may be set. A fan gently circulates this heated air
throughout the oven, over and around the food, producing golden brown exteriors and rich, moist
interiors. This circulation of heated air is called convection.
Because the heated air is kept constantly moving, not permitting a layer of cooler air to develop
around the food, some foods cook faster than in regular oven cooking.
For Best Results...
Use one shelf in the lower position and leave at least a 1-inch gap between the cooking dish and the
sides of the oven. For two-level cooking only, useboth shelves.
The shelf is required for good air circulation and even browning.
Seethe Cookware Tipssection for information on suggested cookware.
C}
TURN TO SELECT * PUSH TO ENTER
Bake or Roast with Preheat
ill Pressthe BAKEor ROASTbutton.
[] Turn the dial to set the oven temperature
and press dial to enter. Do not enter bake
time now. (Thecook time will be entered
later, after the oven is preheated.) Seethe
Auto Recipe
TM
Conversionsection below.
[]
[]
Pressthe dial or the START/PAUSE button to
start preheating.
When the oven is preheated, it will signal. If
you do not open the door within i hour, the
oven will turn off automatically.
[] Open the oven door and, using caution,
place the food in the oven.
[] Close the oven door. Turn the dial
to set the cook time and press the dial or
START/PAUSE to start cooking.
[] When cooking is complete, the oven will
signal and turn off.
NOTE:Youmay change the cook time at any
time during cooking by turning the dial
You may change the oven temperature at any
time during cooking by pressing the POWER
button. Turn the dial to set the oven temperature
and press the dial to enter.
To view the cook time and oven temperature
during cooking,press the BAKEbutton.
18
Bake or Roast without Preheating
ill If your recipe does not require preheating,
press the BAKE or ROAST button. See the
Auto Recipe
TM
Conversion section below.
[]
[]
Turn the dial to set the oven temperature
and press to enter.
Turn the dial to set the cook time and press
to enter.
[] Press the dial or the START/PAUSE button to
start the oven.
NOTE:Youmay change the cook time at any
time during cooking by turning the dial
You may change the oven temperature at any
time during cooking by pressing the POWER
button. Turn the dial to set the oven temperature
and press the dial to enter.
To view the cook time and oven temperature
during cooking,press the BAKEbutton.
Auto Recipe'" Conversion
When using CONVECTION BAKE,the Auto Recipe
TM
Conversion feature will automatically convert
entered regular baking temperatures to convection baking temperatures.
This feature is activated so that the display will show OFFSET ON and the actual converted
(reduced)temperature. For example, if you enter a regular recipe temperature of 350% and press
the STARTbutton, the display will show the converted temperature of 325%.
This feature can be turned off in the OPTIONSmenu. Seethe Auto Recipe
TM
Conversion Selection in
the About the other features section.
NOTE:If convection baking and the Auto Recipe
TM
Conversion feature isturned off, reduce the
oven temperature 25% from the recipe to prevent overbrowning on the top of baked goods.