Empty The 2-In-1 Water Tank; Rinse - Bissell PowerSteamer 8804 User Manual

_peration
EmptyThe 2-in-1 water tank
1. Remove the 2-in-1water tank fromthe baseusing
the tank carryhandle.Carrythetank likea bucketto
a utilitysinkor outside whereyouwill disposeofthe
collection water Remove thetop of thetank by rotating
thehandleforwardto unlatchlid andliftinglid off tank.
2. Emptycollection water from bottomof tank.
NOTE: You may notice hair & debris deposits
on the carpet or in the tank that were
loosened by the cleaning action (especially
with newer carpets that have never been
deep cleaned before). This debris should be
picked up and thrown away.
3. After each use, removeand rinse the lint screen
locatedon the tank lid.
4. Refill the tank in tank by referencing"Fill the 2-in-
1 water tank" on page 9. Rememberto securethe
top of the tank by rotatingthe handle and test to
make sure it is secure before picking up.
5. Return2-in-1 water tank to the machine.
NOTE:Always check the level of cleaning
formula in the SmartMix tank at the same
time, and refill as needed.
1,
3,
Rinse (optional)
Rinsing is an optional step that can be done
during the cleaning process by switching to the
water rinse
setting,
or it can be done after the
carpeted area has been cleaned.
1. Simply choosethe water rinse setting on the
SmartMixdial, and follow the same path as you
did for cleaning,taking care to do a forward (wet)
stroke by depressing the trigger, a backward (wet)
stroke, and a forwardand backward (dry)stroke,
releasingthe trigger. Continuethis until the water
you see coming up the nozzle is clear.
1,
/ WARNING:
To reducethe risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
www.bissell,com 800.237.7691
11 /
ii
ug310-5944 1697 207.indd 11 2/20/07 3:03:29 PM