How To Use This Guide; Assembly - Bissell PowerSteamer 8804 User Manual

to Use this Guide
This user's guide has been designed to help you
get the utmost satisfaction from your BISSELL
PowerSteamer. You'll find assembly and operat-
ing instructions, safety precautions, as well as
maintenance and troubleshooting instructions.
Please read this guide thoroughly before
assembling your deep cleaner.
Payparticularattentionto the productdiagram,assembly
instructions, a ndpart names.Locateand organizeall parts
beforeassembly. F amiliarize yourselfwith the partsand
wherethey go. Following this user'sguidewill greatly
enhance your abilityto getthe most performancefrom your
BISSELL P owerSteamer for many years.
YourPowerSteamercomesin three,easy to
assemblecomponents:
UpperHandle
LowerHandle
ToolCaddy
The only thing you will needto assembleyour cleaner is
a Phillips head(_'_ screwdriver.
w_
WARNING:
Do not plug in your
cleaner until you have
completely assembledit per
the following instructions
and are familiar with all
instructionsand operating
procedures.
1. Slide upper handleonto lower handle.
2. Feedbundled power cord through tool caddy from
caddy'sflat side.
3. Align upperhandle holesand tool caddy holes.
4. Placehex nut into backof tool caddyand hold in
place.Insertbolt from front to backturning into the
hex nut until snug. Donot overtighten. Repeat f or
the secondbolt andhex nut.
5. Insert2 screwsinto lower 2 holes. T urnuntil snug.
6. Snaptools into storageon the tool caddy.
7. Wrap power cord and flex hose as shown in
figure 7.
PowerSteamerassemblyis now complete.
3, 4,
6
www.bissell.com 800.237.7691
ug310-5944 1697 207.indd 6 2/20/07 3:03:24 PM