Empty The Water Tank - Bissell 1697 User Manual

O
peration
Cleaning strokes
1.
While pressing the spray trigger, make one
slow forward wet pass and another one
back. Let the BISSELL deep cleaning formula
do the work for you.
caution: Do not overwet.
2. Release the spray trigger, and make one slow
forward and backward pass over the same area
to remove any residual dirty water, and aid in
drying. Repeat cleaning passes until solution
being pulled up appears clean. Continue passes
without pressing the spray trigger until you can't
see any more water being pulled up.

Empty the water tank

1.
Remove the water tank from the base using
the tank carry handle. Carry the tank like a
bucket to a utility sink or outside where you
will dispose of the collection water. Remove
the top of the tank by rotating the handle
forward to unlatch lid and lifting lid off tank.
2. Empty collection water from bottom of tank.
notE: you may notice hair & debris
deposits on the carpet or in the tank that
were loosened by the cleaning action
(especially with newer carpets that have
never been deep cleaned before). this debris
should be picked up and thrown away.
3.
After each use, remove and rinse the lint
screen located on the tank lid.
4. Refill the water tank by referencing "Fill the
water tank" on page 8. Remember to secure
the top of the tank by rotating the handle
and test to make sure it is secure before
picking up.
5. Return water tank to the machine.
w w w . b i s s e l l . c o m
ug120-4002_1697E_707.indd 9
Tip:
Deep cleaning stairs and heavy traffic areas
on a regular basis can prolong carpet life.
1
3
5
2
4
9
9/8/08 10:10:00 AM