Fill The 2-In-1 Water Tank; Fill The Smartmix/Formula Tank - Bissell PowerSteamer 8804 User Manual

Fill the 2-in-1 water tank
1. Releasethe handle and lay the machinehandle
back to access the Tank.
2. Removethe tank from the base of the machine by
lifting the tank carry handle.
3. Carrylikea bucketto the sink.Rotatethehandle
forwardto unlatchthe lid.Liftoff andsetthe lid aside.
4. Fill up the bladderwith clean hot tap water.
*Do not boil or microwavewater as it can
destroythe bladder.
5. Replacethe top of the tank by matchingthe lid
and tank edges. Handlemust be in the forward
position in orderto replace lid. Rotatethe handle
to the carrying position to latch the lid.
Note:Remember t o secure the lid andtestto
makesureit is secure beforepickingupthe tank.
6. Placetank into machinebase,seatingfirmly in place.
Rotatetank handleback into latchedposition.Bring
machinehandleback into uprightposition.
I:',I,I:L
Fill
1.
2a.
2b.
the SmartMix/formulatank
Liftthe formulatank upandout of the machine base.
Fill the formula tank byfirst unscrewingthe cap
and insert.Alwaysuse genuineBISSELL f ormulas
to maximizecleaningandfor thesafetyof your
machine.Fillformulaup to the line andreplacethe
cap and insert.Placeformulatank into the slot inthe
back of the machinefor a snugfit.
If usingthe BISSELL 3 XConcentrated FiberCleansing
Formula: A dd3 capfuls of 3X Concentrated Fiber
!
Cleansing formulato the formulatank, andthen fill
I_
with warm water to the line.
IZBWARNING:
Note: ff bottleleaks,checkfor properpositioning
TOReduce the Riskd Fireand
of redgrommentandstraw insert.
Electric Shockdueto internal
component d amage,useonly
BISSELL cleaning fluidsintended
for usewiththe deepdeaner.
www.bissell.com 800.237.7691
ii
ug310-5944 1697 207.indd 9 2/20/07 3:03:27 PM