Zoom R8 Interface Manual page 35

Using the R8 with Mac OS X 10.5.8
If noise should occur when using the
procedures below to change the audio class setting.
Setting the audio class
1
Connect the
USB cable. Then, turn the power ON.
2
Press
3
Select AUDIO I/F.
4
Select CLASS and set it to UAC1.0.
5
Select EXECUTE.
6
Audio interface mode is enabled.
as an audio interface with Mac OS X 10.5.8, follow the
and the computer by
Change menu
Press
Change menu
Change setting
Change menu
Press
Icon appears when
connection is made.
HINT
● The USB Audio Class is a specification
for audio devices connected by USB and
includes UAC1.0 and 2.0. UAC2.0 allows
transfer at Hi-Speed (480 Mbps) mode,
which reduces latency.
NOTE
● When using Windows or Mac OS X 10.6.5,
use the default setting of UAC2.0.