Specifications - Zoom A2.1u Operation Manual

Number of effect types
Number of effect modules 8 simultaneously usable modules
Patch memory
User area
Preset area
Sampling frequency
A/D conversion
D/A conversion
Signal processing
Frequency response
Display
Input
Rated input level:
Input impedance:
Outputs
XLR connector (balanced output)
Control input
USB interface
PC interface
Sampling frequencies
Power requirements
AC adapter
Batteries
Dimensions
Weight
Optional accessory
* 0 dBm = 0.775 Vrms
* Design and specifications subject to change without notice.
ZOOM A2.1u

Specifications

47
10 patches x 4 banks
10 patches x 4 banks
96 kHz
24-bit, 64-times oversampling
24-bit, 128-times oversampling
32-bit
20 Hz – 40 kHz +1 dB, -3 dB (10 kilohm load)
2-digit 7-segment LED display, parameter LEDs, pedal assign LEDs
Standard monaural phone jack
-20 dBm
1 megohm
Standard stereo phone jack (line/headphones)
Line output maximum rating: +5 dBm
(output impedance 10 kilohms or more)
Headphone output maximum rating: 20 mW + 20 mW (into 32-ohm load)
Input/output gain: 0 dB
Output impedance: 100 ohms (HOT-GND), (COLD-GND),
200 ohms (HOT-COLD)
FP02 (FP01)/FS01 input
16-bit (record/play, stereo)
32 kHz, 44.1 kHz, 48 kHz
9 V AC, 300 mA (ZOOM AC adapter AD-0006)
Four IEC R6 (size AA) batteries, continuous operating time 6 hours
(with alkaline batteries)
165 (D) x 255 (W) x 79 (H) mm
1200 g (without batteries)
Expression pedal FP02/Foot switch FS01
39