Using The Rhythm Function - Zoom A2.1u Operation Manual

Using the Rhythm Function

The A2.1u has a built-in rhythm function that plays realistic drum sounds in various patterns. The rhythm
function is available in play mode or in the bypass/mute condition.
Set the A2.1u to play
mode (or manual mode)
If the Module selector is set to a position
other than "PLAY", set it to "PLAY".
HINT
The rhythm function can be used both in
play mode and manual mode.
Start the rhythm
function
To start the rhythm function, press
the RHYTHM [R/P] key.
NOTE
While the rhythm is playing, the
DELAY/REVERB module is set to off.
Select a rhythm
pattern
The A2.1u has 40 built-in rhythm patterns.
For more information on the pattern contents,
see the back cover of this manual.
To continuously switch rhythm
patterns, turn parameter knob 1.
To select the next higher or next
lower rhythm pattern, press one of
the BANK [-]/[+] keys.
When the above steps are carried out, the
current rhythm pattern number (01 – 40) is
briefly shown on the display.
12
ZOOM A2.1u