Controls And Functions / Connections - Zoom A2.1u Operation Manual

Controls and Functions / Connections

Module selector
Switches between play/manual mode and edit
mode. In edit mode, the knob selects the module
for operation.
BANK [-]/[+] keys
In play mode and manual mode, the keys serve for
directly switching to the next lower or higher bank.
In edit mode, the keys switch the effect type for the
currently selected module.
[STORE] key
Serves for storing edited patches in memory.
Display
Shows patch numbers, setting values, and other
information about operating the A2.1u.
[W]/[Q] foot switches
These switches serve for selecting patches, turning
effect modules on and off, controlling the tuner,
and other functions.
Computer
[BALANCED OUT] connector
This XLR connector can be used to
send a balanced line-level signal to
PA equipment, recording devices, or
similar.
[PRE/POST]
switch
Selects the point
where the signal
supplied at the
[BALANCED OUT]
connector is branched
off.
6
[USB] connector
Allows you to connect the A2.1u to a
computer, for use as an audio interface.
Mixer
[GROUND] switch
Determines whether the
[BALANCED OUT]
connector is grounded
or not.
Top Panel
Rear Panel
PA system
Headphones
ZOOM A2.1u