Specifications - Zoom G2.1u Service Manual

Effect types
Effect modules
Patches
Sampling frequency
A/D converter
D/A converter
Signal processing
Frequency response
Display
Input
Rated input level
Input impedance
Output
Maximum output level
Control input
USB interface
PC interface:
Sampling frequency:
Power requirements
AC adapter
Batteries
Dimensions
Weight
Options
• 0 dBm = 0.775 Vrms
• Design and specifications subject to change without notice.

Specifications

54 types
Max. 9 simultaneous modules
User area: 10 patches x 4 banks
Preset area: 10 patches x 4 banks
96 kHz
24 bit, 64 times oversampling
24 bit, 128 times oversampling
32 bit
20 Hz - 40 kHz +1 dB -3 dB (with 10 kilohms load)
2-digit 7-segment LED
Parameter LEDs, Pedal assign LEDs
Standard mono phone jack
-20 dBm
1 megohm
Standard stereo phone jack (doubles as line and headphone jack)
Line: +5 dBm (output load impedance 10 kilohms or more)
Phones: 20 mW + 20 mW (into 32 ohms load)
For FP01, FP02, and FS01
16-bit (stereo configuration for recording/playback)
32kHz, 44.1kHz, 48kHz
9V DC, 300 mA (center minus plug) (ZOOM AD-0006)
Four IEC R6 (size AA) batteries,
Approx. 7.5 hours continuous operation (alkaline batteries)
165 mm (D) x 255 mm (W) x 79 mm (H)
1100 g (without batteries)
Expression pedal FP02/ Foot switch FS01
- 5 -