Restoring Factory Defaults - Zoom A2 Operation Manual

Restoring Factory Defaults

In the factory default condition, the patches of the user area (A0 - d9) contain the same settings as the
patches of the preset area (00 - 39). Even after overwriting the user patches, their original content can be
restored in a single operation ("All Initialize" function).
1.
Turn the A2 on while holding down
the [STORE] key.
The indication "AL" appears on the display.
2.
To carry out the All Initialize function,
press the [STORE] key once more.
All patch settings are returned to the factory
default condition, and the unit switches to play
mode. To cancel All Initialize, press the
RHYTHM [R/P] key instead of the [STORE]
key.
NOTE
When you carry out All Initialize, any newly created
patches that were stored in the user area will be
deleted (overwritten). Perform this operation with care
to prevent losing any patches that you want to keep.
24
A L
ZOOM A2