Table of Contents
Advertisement
Effect Types and Parameters
Defret
D 1
D 9
This effect makes the sound of a fretted bass resemble that of a fretless bass. Higher setting
values result in higher effect sensitivity.
Slow Attack
S 1
S 9
This effect reduces the attack rate of each individual note, producing a violin playing style
sound. Higher setting values result in slower attack times.
Pedal Vox
V 1
V 9
This effect simulates the half-open sound of a vintage Vox wah pedal. Higher setting values
result in higher emphasized frequency.
■
DRIVE module
This module includes 13 types of amp/stomp box modeling effects and a bass synthesizer.
For this module, DRIVE (effect type), GAIN (parameter 1), and MIX (parameter 2) can be
adjusted separately.
DRIVE (Type)
Selects the effect type for the DRIVE module.
AMPEG
A G
Effect modeled on the sound of the
ultimate rock bass amp, the Ampeg SVT.
SWR
S W
Simulation of the SWR SM-900,
famous for its hi-fi sound.
BASSMAN
B M
Effect modeled on the sound of the
Fender Bassman 100.
TRACE ELLIOT
T E
Effect modeled on the sound of the
Trace Elliot AH-500.
SANSAMP
S A
Simulation of the Sansamp Bass Driver
DI, highly popular among bass players.
ODB-3
O D
Simulates the ODB-3 overdrive bass
machine from Boss.
FUZZFACE
Simulation of the Fuzz Face that made
F F
rock history with its zany look and
smashing sound.
GAIN (Prm1)
Sets the DRIVE module parameter 1. The parameter type depends on the
currently selected effect type.
When distortion effect type is selected
Gain
0
3 0
Adjusts the gain (distortion depth).
20
SUPER BASS
S B
Simulation of the Marshall Super Bass
head amp that has made rock history.
ACOUSTIC
A C
Effect modeled on the sound of the
Acoustic 360 with its tight midrange.
HARTKE
H A
Simulation of the Hartke HA3500
famous for its aluminum cone.
TUBE PRE
T U
ZOOM original tube preamplifier
sound.
TS9
T S
Simulation of the Tube Screamer used
by many guitarists as a booster.
MXR BASS DI
D S
Simulates the MXR Bass D.I.+
distortion channel.
MONO SYN
This is a monophonic bass synthesizer
M S
(for single-note playing) that detects
the pitch of the input signal.
ZOOM B1/B1X
When MONO SYN effect type is selected
Variation
S 1
S 5
P 1
P 5
Allows selection of the oscillator waveform type and tone variation. Available settings are "s"
(sawtooth), "p" (square), and "m" (PWM = pulse width modulation).
M 1
M 5
MIX (Prm2)
Sets the DRIVE module parameter 2. This parameter is the same for all effect
types.
Mix
0
1 0
Sets the mixing balance between the signal before the DRIVE module and the signal after
passing the module. Higher setting values result in more drive sound.
* Manufacturer names and product names mentioned in this listing are trademarks or registered
trademarks of their respective owners. The names are used only to illustrate sonic characteristics and
do not indicate any affiliation with ZOOM CORPORATION.
■
EQ module
This is a 3-band equalizer. For this module, the three items EQ LO, EQ MID, and EQ HI can be
adjusted separately.
EQ LO (Prm)
Adjusts the LO
band of the EQ
module.
Lo
Adjusts the low
8
1 8
8
1 8
range (70Hz) boost/
cut.
■
ZNR/AMP (ZNR/Amp Simulator) module
This module combines two elements. ZNR is a noise reduction circuit developed by ZOOM
which removes noise during play pauses without affecting sound quality. The amp simulator
recreates the sound of speaker cabinets.
ZNR/AMP (Type&Prm)
Selects ZNR sensitivity and amp simulator type at the same time.
ZNR (ZOOM Noise Reduction)
0
9
This is the noise reduction function only. Higher setting values result in stronger effect. Set the
value as high as possible without causing the sound to be cut off unnaturally.
AMP&ZNR (Amp Simulator & ZNR)
A 0
A 9
Combination of ZNR with bass amp cabinet simulator. The right-digit value controls ZNR
sensitivity.
ZOOM B1/B1X
Effect Types and Parameters
EQ MID (Prm)
EQ HI (Prm)
Adjusts the MID
Adjusts the HI
band of the EQ
band of the EQ
module.
module.
Mid
Hi
Adjusts the
Adjusts the high
8
1 8
midrange (450 Hz)
range (3 kHz) boost/
boost/cut.
cut.
21
Hide quick links:
Advertisement
Table of Contents
