Output; Contention Management - Xerox ColorQube 9303 User Manual

Output

Select the Output option to access the
following settings:
•

Contention Management

page 279
• Out of Staples Options
• Output Location on page 280
• Within Job Offsetting
• Staple Productivity
Contention Management
The device is capable of processing several
jobs at the same time, such as scanning,
sending a fax, and printing a job. At times,
2 jobs may require the same resource and
the contention management system
decides which job has priority. This device
enables you to change the priority of print
and copy jobs.
• Priority enables you to choose which
jobs have priority, Copy or Print jobs.
Use the arrow buttons to set the
priority for the Copy Jobs and Print
Jobs. Number 1 has the highest priority.
• First In, First Out instructs the device to process jobs based on when they are received. The jobs
are processed in the order they enter the job list.
Out of Staples Options
If your device has a finisher you can set how the device handles a stapling job when the stapler runs
out of staples.
• Complete Job Without Stapling instructs the device to continue the job without stapling.
• Fault/Hold Job instructs the device to hold the job in the job list for the user. If a job has already
started and the staples run out, a fault is declared.
on
on page 279
on page 280
on page 280
ColorQube™ 9301/9302/9303
Administration and Accounting
Device Settings
279