Original Size - Xerox ColorQube 9303 User Manual

Original Size

Select Original Size to enter the size of your document when scanning from the document glass or the
document feeder. Your device uses this information to calculate the size of your original and the
scanned image. You can also select Auto Detect for automatic size detection, or Mixed Size Originals
if scanning a mix of sizes. The options are:
• Auto Detect is the default setting and
enables automatic size sensing. The
size detected is matched to a
standard size paper.
• Preset Scan Areas allows you to
define the size of your original from a
list of pre-set, standard document
sizes. You can view the list by using
the scroll bar.
• Custom Scan Area is used to enter a
specific area for scanning. Measure
the area to be scanned on the original
and enter the X and Y axis
measurements into the fields
provided. Only the area specified is
scanned.
• Mixed Size Originals allows you to
scan documents containing different
size pages. The pages must be the
same width, like A4 LEF and A3 SEF
(8.5x11" LEF and 11x17" SEF). Other
combinations are shown on the
screen.
Select Save to save your selections and
exit.
Layout Adjustment
ColorQube™ 9301/9302/9303
Internet Fax
105