Edge Erase - Xerox ColorQube 9303 User Manual

Layout Adjustment

Edge Erase

Edge Erase enables you to specify how much of the image to erase around the edges of your
document. For example, you can remove the marks caused by punched holes or staples in your original.
The options are:
• All Edges is used to erase an equal
amount from all the edges. Use the
arrow buttons to adjust the amount
to be erased from 0 to 50 mm (0 to
2.0"). All marks or defects within the
measurement set are deleted.
• Individual Edges enables an
individual amount to be erased from
each of the edges.
Use the arrow buttons to adjust the
amount for each edge, from 0 to
50 mm (0 to 2.0").
Select Save to save your selections and exit.
158 ColorQube™ 9301/9302/9303
Workflow Scanning