Venstar T2800 Owner's Manual page 70

How to Set and Reset the Humidifier
Run-Time Alert
This counter keeps track of the number of days since the Service
Humidify icon was last reset; this icon will appear after the number of
days set in step #30 (below) has elapsed. Setting this counter to zero
in step #30 will prevent the Service Humidify icon from ever appearing.
Press the MODE button. While holding
MODE
the MODE, press the PROGRAM
button to enter Setup screens.
PROGRAM
Press the MODE button repeatedly
MODE
until this setup screen appears.
Days since the last reset
of the Service Humidify
counter.
Reset the counter to 0 to
Press
remove the Service Humidify
icon from the display.
FAN
Press the MODE button repeatedly
MODE
until this setup screen appears.
Adjust the number of days
Service
in increments of 10 before
the Service Humidify icon
appears.
0 = Off
(0 - 1990 days)
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
The humidifier run-time alert does not take the place of
any humidifier manufacturer's recommended maintenance
plan; it only serves as a helpful reminder.
Note: Press the
button momentarily
to move through the
setup screens. Press
and hold the
button to move back-
wards through the
setup screens.
I3
0
Setup
Humidify
Service
30
0
Setup
Humidify
PROGRAM
Page 15.4
MODE
MODE
15
Press