Venstar T2800 Owner's Manual page 23

Operating Mode when the Thermostat
is Configured to be:
PROGRAMMABLE WITH MANUAL-CHANGEOVER - If the thermostat is
configured to be a programmable thermostat with Manual-Changeover, the
4
following screens will be available by pressing the MODE button.
Select the Mode by Pressing the MODE Button
Heating Only
The HEAT setting indicates the
temperature the room has to
reach before the furnace will
turn on to heat the room.
Cooling Only
The COOL setting indicates the
temperature the room has to
reach before the air conditioner
will turn on to cool the room.
Time Schedule for
Heating Only
The HEAT Program On setting
will activate the time period
program for the heating
setpoint ONLY (occupied or
unoccupied periods).
Time Schedule for
Cooling Only
The COOL Program On setting
will activate the time period
program for the cooling
setpoint ONLY (occupied or
unoccupied periods).
Off
OFF indicates both heating
and air conditioning
systems are turned off.
I2:00
70
Pm
Su
68 H
EAT
76
I2:00
70
Pm
Su
C
OOL
I2:00
70
Program On
Pm
Su
68 H
EAT
occupied
76
I2:00
70
Program On
Pm
Su
C
OOL
occupied
I2:00
70
Pm
Su
OFF
Page 4.6
Press
MODE
Press
MODE
Press
MODE
Press
MODE