Venstar T2800 Owner's Manual page 39

Turning On/Off the Backlight Turning On/Off the Backlight
Press the MODE button. While holding Press the MODE button. While holding
MODE MODE
the MODE, press the PROGRAM the MODE, press the PROGRAM
button to enter Setup screens. button to enter Setup screens.
PROGRAM PROGRAM
Press the MODE button repeatedly Press the MODE button repeatedly
MODE MODE
until this setup screen appears. until this setup screen appears.
Select backlight operation: Select backlight operation:
8 8
AUTO - Light from 6pm to AUTO - Light from 6pm to
6am nightly. 6am nightly.
ON - Light continuously. ON - Light continuously.
OFF - Light for 8 seconds OFF - Light for 8 seconds
after a button press. after a button press.
Programming the Thermostat to Display Programming the Thermostat to Display
Temperature in Fahrenheit or Celsius Temperature in Fahrenheit or Celsius
C C
Select thermostat Select thermostat
operation in degrees operation in degrees
Fahrenheit or Celsius. Fahrenheit or Celsius.
F F
Press the PROGRAM button to leave the Setup screens. If no buttons are Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds. pressed, the display will leave the setup screens after 30 seconds.
Note: Press the Note: Press the
button momentarily button momentarily
to move through the to move through the
setup screens. Press setup screens. Press
and hold the and hold the
button to move back- button to move back-
wards through the wards through the
setup screens. setup screens.
4 4
Setup Setup
AUTO AUTO
5 5
f f Setup Setup
Page 8.2 Page 8.2
MODE MODE
MODE MODE
Press Press
MODE MODE
Press Press
PROGRAM PROGRAM