Panasonic DP-8025 Operating Instructions Manual page 191

Hide thumbs Also See for DP-8025:
Table of Contents

Advertisement

Fax Parameter Table
* = Factory default setting
No.
Parameter
014
File Acceptance Report
017
Receive Mode
022
Substitute Receive
024
Print Reduction
025
Reduction Ratio
026
Polling Password
027
Polled File Save
028
Stamp At Memory XMT
031
Incomplete File Save
033
XMT Reduction
037
Receive to Memory
039
PIN Code Access
042
Conf. File Save
Continued on the next page...
Customizing Your Machine
Setting
*Invalid
Selecting whether the machine prints the file acceptance journal.
If you set this parameter to valid, a journal will print out after any
Valid
memory communication.
Manual
Setting the reception mode to automatic, or manual.
*Auto
Invalid
Selecting whether the machine receives to memory when the recording
paper runs out, toner runs out, or the recording paper is jammed.
*Valid
Fixed
Selecting print reduction mode.
Fixed : Reduce received document according to setting of Parameter
*Auto
No. 25.
Auto : Automatically determines, and reduces the incoming document
to print onto the paper loaded in the machine.
70%
Selecting the fixed print reduction ratio from 70% to 100%. This
parameter functions only when the fixed print reduction is selected on
----
Fax Parameter No. 24.
100%
(----)
Setting a 4-digit password for secured polling. (See page 48)
*Invalid
Selecting whether the machine retains the polled document in memory
even after the document is polled once.
Valid
Invalid
Selecting whether the machine stamps the original documents when
storing the documents into memory.
*Valid
(Depends on the Stamp setting on the Control Panel)
*Invalid
Selecting whether the machine retains the document in memory if the
document is not successfully transmitted.
Valid
Invalid
Selecting whether the machine performs reduction when the
transmitting original is wider than the recording paper used at the
*Valid
receiving machine.
(----)
Enter a 4-digit password for printing the received document(s) in
memory by using
MODE SETTING
When
RECEIVE TO MEMORY
selectable on the LCD display. (See page 84)
*None
Selecting the access method (Prefix or Suffix) to dial a number with PIN
Code. (See page 87)
Suffix
Prefix
*Invalid
Selecting whether the machine saves the confidential polled file even
after the file is polled once.
Valid
Comments
RECEIVE TO MEMORY
SELECT MODE
is set to ON, this parameter is not
.
191

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp-8032

Table of Contents