Panasonic DP-8025 Operating Instructions Manual page 130

Sending Documents via LAN
Internet Fax Ledger Size Document Transmission
4
5
To send with reduction, follow the steps below.
Repeat steps 1 to 5, except in step 4, set the "Ledger Email Transmit" setting to "OFF" position.
When the Select Mode "Ledger Email Transmit" setting is set to the "OFF" position, the transmission
reduction is according to the setting of Fax Parameter No. 141 (LAN XMT Reduction). (See the Table
below)
Ledger Email Transmit = ON
Ledger Email Transmit = OFF
Document Size
LEDGER
A4/Letter
NOTE
130
Make sure that the setting is
Dial by any combination of the following methods:
• Manual Email Addressing, press
70 stations)
• Address Book Email Addressing.
(Up to 200 stations)
Ex:
PANASONIC
The document(s) is stored into memory with a file number.
The machine then connects to the LAN, and transmits the Ledger size
document(s).
(After the document(s) are sent, the "Ledger Email Transmit" Select Mode will
automatically return to the preset position (ON))
Ledger Email Transmit = ON
B4
1. Factory default setting for Fax Parameter No. 141 (LAN XMT Reduction) is "Invalid".
and press
ON
after each station is entered. (Up to
OK
Memory Transmit STN(s):001
TO: PANASONIC
abc@panasonic.com
PANASONIC
: Transmits actual document size (without reduction).
: Reduces LEDGER size document to B4 size, or to A4/Letter
before transmission. (According to the Fax Parameter No. 141
(LAN XMT Reduction) setting, see Table below)
Document Size Transmission
Fax Parameter No. 141
(LAN XMT Reduction)
set to "Invalid"
LEDGER
B4
A4/Letter
.
OK
QUALITY DEPT
Ledger Email Transmit = OFF
Fax Parameter No. 141
(LAN XMT Reduction)
set to "Valid"
B4
B4
A4/Letter
TIFF
A4/Letter
A4/Letter
A4/Letter