Selecting The Conduits For A Modem Hotsync Operation - Palm Handhelds m100 Handbook

Note: If you need to create a new modem configuration, tap
the Menu icon and then select Options and Connection
Setup. See "Connection preferences" in Chapter 6 for
more information. After you create the configuration, a
pick list appears below the HotSync icon. Tap the pick
list to select your new configuration.
4. Tap the Enter phone # field.
5. Enter the telephone number to access the modem connected to
your computer.
6. If needed, enter a dial prefix (such as "9") to access an outside line,
and then tap the Dial Prefix check box.
Tip:
You can enter a comma in the field to introduce a "pause"
in the dialing sequence. Each comma equals a two second
pause.
7. If the phone line you're using with your handheld has Call
Waiting, select the Disable call waiting check box to avoid an
interruption during the modem HotSync operation.
8. If you want to use a calling card to place the call, select the check
box and enter the calling card number.
9. Tap OK.
Selecting the conduits for a modem
HotSync operation
The Conduit Setup dialog box on your handheld enables you to define
which files and/or applications synchronize during a modem
HotSync operation. You can use these settings to minimize the time
required to synchronize data with a modem.
Page 141
Tap here
Advanced HotSync® Operations