Palm Handhelds m100 Handbook page 132

HotSync
Enabled/
Disabled
Enable
HotSync
software at
system
startup
Show more
detail in
HotSync Log
3. Click the Serial Port Settings tab and select any of the following
options.
Page 125
Activates the serial port monitor and prepares
your Macintosh to synchronize with your
handheld. When this option is enabled, you
cannot use the serial port you selected for
other operations such as printing, faxing, or
Apple Talk networking. When this option is
disabled, the serial port you selected is
available for use by other applications.
Activates the serial port monitor automatically
each time you start your computer. If this
option is not checked, you must open HotSync
Manager and select the Enabled option before
you can perform a HotSync operation.
Includes more troubleshooting information in
the log that is generated when you perform a
HotSync operation.
Advanced HotSync® Operations