Table of Contents
Advertisement
Modem
Setup
String
4. Click OK.
To prepare a Macintosh for a modem HotSync operation:
1. Confirm that the Macintosh modem is connected and turned on,
and that no communications applications, such as fax or telephony
software, or AppleTalk networking are running on that serial port.
Note:
Make sure the Macintosh is disconnected from all online
services, such as CompuServe and America Online
(AOL). This helps to avoid conflicts with the serial port.
2. Double-click the HotSync Manager icon in the Palm folder.
3. Click the Serial Port Settings tab.
4. Under Check for handheld connection using, click Modem Setup.
5. Adjust the following options as needed.
Page 139
Identifies the modem type or manufacturer. Refer
to your modem manual or face plate for its type or
settings. If you're not sure of your modem type or
your modem doesn't match any that appear in the
list, select Hayes Basic.
Identifies the setup string for your particular
modem. Not all modems require a setup string.
Refer to your modem manual and enter the setup
string if recommended by the manufacturer.
Advanced HotSync® Operations
Advertisement
Table of Contents
