Palm Handhelds m100 Handbook page 76

Note: User names appear in the User pop-up on the right side of
the toolbar. You can change users by selecting a new name
in the pop-up menu.
Each subsequent time you perform a HotSync operation, HotSync
Manager reads the user name from your handheld and
synchronizes the data in the folder of the same name.
Note: Be sure you select the correct user name from the User pop-
up before entering data on Palm Desktop or performing a
HotSync operation.
If you are a System Administrator preparing several handhelds for
a group of users, you may want to create a user profile. See
"Creating a user profile" in Chapter 5 before performing the
following steps.
Important: You must perform your first HotSync operation with a
local, direct serial connection.
The following steps assume that you have already installed the
Palm Desktop software. If you have not installed this software, see
"Installing Palm Desktop software" in Chapter 1 for instructions.
To perform a local HotSync operation on a Macintosh:
1. Connect your handheld to the HotSync cradle/cable.
Shown with a
HotSync cradle.
Some models use
a cable in place
of the cradle.
2. Make sure HotSync Manager is enabled: Double-click the
HotSync Manager icon in the Palm folder. Click the HotSync
Controls tab and make sure the Enabled option is selected.
3. Press the HotSync button
Page 69
on the cradle/cable.
Using Your Applications