Bluetooth (Optional); Touchpad - Packard Bell MX Disassembly Manual

1313131313

Bluetooth (Optional)

To remove the optional Bluetooth module, first remove the battery (see Battery), the HDD (see
Drive), the CD-ROM or DVD drive (see
the installed memory (see Memory), the CPU (see Processor), the keyboard (see Keyboard), remove the
LCD screen (see LCD Screen
perform the following steps:
1. Carefully disconnect the Bluetooth cable.
2. Extract the Bluetooth module; the module has been clicked into place (see

Touchpad

To remove the touchpad, first remove the battery (see Battery), the HDD (see
ROM or DVD drive (see
memory (see Memory), the CPU (see Processor), the keyboard (see Keyboard), remove the LCD screen
(see LCD Screen Assembly), the main board top cover up to step 7 (see
the following steps:
1. Remove the 2 screws securing the touchpad buttons board to the top cover.
Optical Disk
Assembly), the main board up to step 8 (see
Fig. 21 Location of Bluetooth module and connector.
Optical Disk Drive), the wireless network card (see
Fig. 22 Location of touchpad buttons board.
Packard Bell EasyNote MX Disassembly Manual
Drive), the wireless network card (see
WLAN
Main
Hard Disk
WLAN Card),
Main Board), and then
Fig. 21).
Hard Disk Drive), the CD-
Card), the installed
Board), and then perform
13