Autopage RF-505 Operation Manual page 6

Professional vehicle security
Hide thumbs Also See for RF-505:
Table of Contents

Advertisement

PASSIVE ARMING OPERATION—
The RF-505 provides a choice of arming capabilities. The alarm can be set
to automatically arm, or be manually armed. This selection can be done
using the remote transmitter. Follow these steps to turn ON or OFF passive
(automatic) arming and manual arming:
Press the "M" and "Car" buttons together for 5 seconds. The siren will chirp
3 times. Press the "Lock/Unlock" button, the siren will chirp 4 times to and
exit the program mode. To change back to Manual arming, press the "M"
and "Car" buttons together for 5 seconds. The siren will chirp 3 times. Press
the "Car" button, the siren will chirp 4 times and exit the program mode.
Transmitter Button
+
SHOCK SENSOR ADJUSTMENT FROM REMOTE TRANSMITTER
ADJUSTING THE SIS-5P SHOCK SENSOR
There are 15 sensor adjustment settings. To adjust the SIS-5P press the "M"
& "Lock/Unlock" buttons together for 5 seconds. The siren or horn will
respond with 3
chirps.
sensitivity and pressing the "Car" button will decrease the sensitivity. You
will hear a chirp from the siren after each setting adjustment and a double
chirp from the siren when you have reached setting No.1 or setting No.15.
While setting the sensitivity for the SIS-5P, you can test the shock sensor for
proper adjustment by applying impact to the vehicle during the adjustment
mode.
Actions
Press & Hold 3 sec.
Press 1 Time
Press 1 Time
Pressing the "Lock/Unlock" button will increase the
6
System Function
Passive / Manual Mode
Passive ON
Passive OFF

Advertisement

Table of Contents
loading

Table of Contents