GE PGSS5PJZASS Owner's Manual And Installation Instructions page 8

About the shelves and bins.
Adjustable Bins on the Door
Adjustable bins can easily be carried from
refrigerator to work area.
To remove: Lift bin straight up, then pull out.
To replace or relocate: Slide in the bin just
above the molded door supports, and push
down. The bin will lock in place.
The snugger helps prevent tipping, spilling
or sliding of small items stored on the door
shelf. Grip the finger hold near the rear of the
snugger and move it to fit gour needs.
Non-Adjustable Bins on the Door
To remove: Lift the bin straight up, then
pull out.
To replace: Engage the bin in the molded
supports on the door and push down. It will
lock in place.
Adjustable Divider in Freezer Basket
The freezer basket has a divider that can be
both repositioned or removed.
To remove: Pull the divider forward until the
rear locating tabs are out of the slots. Turn
the divider slightlg to the side to releasethe
front locating tabs and lift out.
To replace: Turn the divider slightlg to one
side so the tabs on the front fit into the vent
slots on the basket. Position the divider so
the back locating tabs snap into place in the
back vent slots.
To reposition: Removethe divider. Slide the
divider to the right of center to the desired
location and replace as instructed above.
NOTE:The divider cannot be placed to the
left of center because it would interfere with
the icemaker.
About the additional features.
Not all features are on all models.
Non-Adjustable Beverage Rack
To remove: Lift the rack straight up, then pull
out.
To replace: Engage the rack in the molded
supports on the door and push down. It will
lock in place.
8