GE PGSS5PJZASS Owner's Manual And Installation Instructions page 20

Installation Instructions
INSTALLING THE REFRIGERATOR
(cont.)
[_] REMOVE THE FRESH FOOD
DOOR HANDLE
(For placement in the installation location or
reversal of the handles - on some models}
Stainless steel Ion some models):
@ REMOVING THE DOOR
HANDLE: L oosenthe
set screws with the
3/]2 Allen wrench
and remove the
handle. NOTE:For
Double Door models,
follow the same
procedure on the
opposite door.
Badge
Mounting
Fasteners
(appearance m ayvary)
Plastic handle (on
some models}:
@ REMOVING THE DOORHANDLE: D epressthe tub on
the underside of the handle end slide the handle up
and off of the mounting fasteners.
REVERSING THE
0
DOORHANDLE
(on some models):
• Removethe
handle mounting
fasteners with a
1//4 Allen
wrench and
transfer the
handle mounting
fasteners to the
right side.
Removethe logo
badge.
Mounting
Fasteners
f
Badge
(appearance may vary)
• Remove and
transfer the plug button to the left
side of the fresh food door. NOTE:Use a flat plastic
edge to prevent damaging the door. Removeang
adhesive on the door with a mild detergent. Remove
the paper covering on the adhesive backing on the
logo badge prior to carefullg attaching the badge to
the door.
[Z] REMOVE THE TOP AND BOTTOM
FREEZER DRAWER HANDLES
Stainless steel and plastic handles:
@ Loosenthe set screws located on the underside of
the handle with the 1/8 Allen wrench and remove
the handle.
NOTE:If the handle mounting fasteners need to be
tightened or removed, use a 1//4 Allen wrench.
@
@
2O