General; Lubrication - Craftsman 320.17235 Operator's Manual

4.8 amp variable speed orbital sabre saw
Table of Contents

Advertisement

GENERAL
Z_ WARNING:
ALWAYS disconnect
the tool from the power source BEFORE
cleaning
or performing
any maintenance,
i
z_ WARNING:
DO NOT at any time let brake fluids, gasoline,
petroleum-based
products,
penetrating
oils, etc. come in contact with plastic
parts. Chemicals
can damage,
weaken or destroy plastic, which may result in
serious personal
injury.
It has been found that electric tools are subject to accelerated wear and possible
premature failure when they are used to work on fiber glass boats and sports cars,
wallboard,
spackling
compounds
or plaster. The chips and grindings from these materials
are highly abrasive to electrical
tool parts, such as bearings, brushes, commutators,
etc.
Consequently,
it is not recommended
that this tool be used for extended work on any
fiberglass
material, wallboard,
spackling
compound
or plaster. During any use on these
materials,
it is extremely
important
that the tool is cleaned frequently
by blowing with an
air jet.
i
Z_ WARNING:
Always wear safety goggles or safety glasses with side
shields during power tool operations,
or when blowing dust. If operation
is
dusty, also wear a dust mask.
LUBRICATION
All of the bearings
in this tool are lubricated
with a sufficient amount of high-grade
lubricant for the life of the tool under normal operating conditions.
Therefore,
no further
lubrication
is required.
I Z_ WARNING:
The use of attachments
or accessories
that are not
I
I
recommended
for this tool might be dangerous
and could result in serious injury.
I
Sears and other Craftsman
outlets have a large selection of Craftsman
sabre saw
blades designed
for specific
cutting applications.
Sabre saw blades are available
for super fine wood scrolling,
and smooth,
medium
and fast wood cutting. Select metal cutting blades for fast or for smooth
cutting,
or knife blades designed to cut vinyl, leather, rubber, cork and carpet.
There are special
blades available
for cutting abrasive
materials
such as plaster
and wallboard,
and most all blades are available
in individual
packs or variety and
assorted
sets.
Sears and other Craftsman
outlets also offer safety equipment,
sawhorses,
work
stands, straight edges, cutting guides and a large selection of clamps to help you
with all your sawing needs.
Visit your local Sears store or other Craftsman
outlets or shop www.craftsman.com
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents