Table of Contents
Advertisement
The purpose of safety symbols
is to attract you attention
to possible
dangers.
The safety symbols,
and the explanations
with them, deserve your careful atten-
tion and understanding.
The symbol
warnings
do not, by themselves,
eliminate
any danger. The instructions
and warning they give are no substitutes
for proper
accident
prevention
measures.
WARNING:
Be sure to read and understand
all safety instructions
in this
manual, including
all safety alert symbols
such as "DANGER,"
"WARNING,"
and
"CAUTION"
before using this Auto-Hammer.
Failure to following
all instructions
listed below may result in electric shock, fire, and/or serious personal
injury.
SYMBOL
SIGNAL MEANING
_.
DANGER:
Indicates
an imminently
hazardous
situation,
which, if not
avoided,
will result in death or serious injury.
WARNING:
Indicates a potentially
hazardous
situation,
which, if not avoided,
could result in death or serious injury.
CAUTION:
Indicates an imminently
hazardous
situation,
which, if not
avoided,
may result in death or serious injury.
CAUTION:
(Without
Safety Alert Symbol)
Indicates a situation
that may result in
property
damage.
WARNING:
To ensure safety and reliability,
all repairs should
be performed
by a qualified
service technician
at Sears Service Center.
WARNING:
The operation
of any power tools can result in
foreign objects
being thrown into your eyes, which can result
in severe eye damage.
Before beginning
power tool operation,
always wear safety goggles or safety glasses with side shield
and a full face shield when needed. We recommend
a Wide
Vision Safety Mask for use over eyeglasses
or standard
safety
glasses with side shields. Always use eye protection
which is
marked to comply with ANSI Z87.1
SAVE THESE INSTRUCTIONS
61352
Manual_Revised_08
0924
Page 3
Hide quick links:
Advertisement
Table of Contents
