Craftsman nextec HAMMERHEAD 320.61352 Operator's Manual page 10

SERVICE
= Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
• When servicing a power tool, use only identical replacement parts.
= Follow instructions in the Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance instructions may create a
risk of shock or injury.
SPECiFiC SAFETY RULES FOR CORDLESS AUTO-HAMMER
Hold power tools by the insulated gripping surfaces when performing
an operation where the tool may contact hidden wiring or its own cord.
Contact with a "live" wire will also make exposed metal parts of the tool
"live" and shock the operator.
Do not insert or try to insert your finger into the hammer sleeve at any
time, failure to do so could result in personal injury. Your finger may get hurt.
Do not stare into the LED worklight directly; never project the worklight to
others' eyes.
Never put your hand continuously on the nail when hammering. Only use
your hand to hold the nail on the workpiece at the beginning of hammering.
This Auto-Hammer is to be used for the nails with diameter less than
7/16-in and length less than 2 1/2-in.
Use clamps or another practical way to secure and support the
workpiece to a stable platform before hammering. Holding the work by
hand against your body leaves it unstable and may lead to loss of control.
WARNING: Wear ear protection. Exposure to noise can cause
hearing loss.
WARNING: To reduce the risk of injury, user must read instruction manual.
61352 Manual_Revised_08 0924 Page 10