Set The Controls; Remove Packaging, Start - GE GBSC3HBXCRBB Owner's Manual And Installation Instructions

Installation Instructions
INSTALLING THE REFRIGERATOR
{cont.}
r_] LEVEL THE REFRIGERATOR
The leveling legs hove 2 purposes:
1) Leveling legs adjust so the refrigerator is
firmlg positioned on the floor and does not
wobble.
2} Leveling legs serve as a stabilizing brake
to hold the refrigerator securely in position
during operation and cleaning. The leveling
legs also prevent the refrigerator from
tipping.
r_ Remove the grille bg removing the two Phillips
head screws.
r_ Turn the leveling legs clockwise to ruise
the refrigerator, counterclockwise to lower it.
CAUTION: To °void
possible
personal injurg or propertg damage,
the leveling legs must be firmlg touching
the floor.
r_ Replace the base grille bg inserting the two
Phillips head screws.
r_] SET THE CONTROLS
Set the controls to the recommended setting.
5 5
I"EOO''E"OEOOO"'"O'S
0 is off 0 is off
(C°lde0 0 _°rmer_ (COlder_ 0 _0rm_
9 is Coldest 9 is Coldest
® ®
Adjust Freezer Adjust Refrigerator
Temperoture Tempereture
2O
REMOVE PACKAGING, START
ICEMAKER (icemoker models}
A) Remove all tape, foam and protective
packing from shelves and drawers.
B) Remove the tie downs from the freezer
baskets.
C} Place half width basket onto drawer slides.
See About the freezer section for instructions.
Set the icemaker power switch to the I (on} position.
The icemaker will not begin to operate until it
reaches its operating temperature of 15°F (-9°C) or
below. It will then begin operation automaticallg. It
will take 2-3 dags to fill the ice bin.
NOTE: In lower water pressure conditions, the
water valve mag turn on up to 3 times to
deliver enough water to the icemaker.