Table of Contents
Advertisement
10
Step
Arrange
Interior
11
Step
Temperature
Controls
12
Step
Start
Icemaker
12
• Remove internal packing materials.
• The freezer compartment shelves are turned
upside down for shipping. They must be
removed and turned right side up. To
remove shelf packing, apply upward pressure
on the inverted shelf with one hand and hold
in place. Remove packing with other hand.
Grip shelf with both hands, lower shelf front
and remove from cabinet. Turn shelf right
side up and install in desired location.
• In the fresh food section, remove packing on
each side of shelves.
• Remove tape from all shelves.
• Set Fresh Food control at "5".
• Set Freezer control at "5".
IMPORTANT: Allow 24 hours for tempera-
tures to stabilize before making adjustments.
• Lower the feeler arm to the ON position
and the icemaker will begin operation
automatically.
• Discard the first few batches of ice cubes to
be sure that any remaining impurities in the
water line will be flushed out.
NOTE: During operation, you will hear the
hum of the motor, movement of the cube
ejector, humming or clicking of the water
valve, and ice falling into the bin. These
sounds are normal.
Installation
Stainless Steel Built-In Refrigerators
FRESH FOOD
OFF
FREEZER
Advertisement
Table of Contents
