Installation Instructions; Before You Begin; Tools; Preparation - GE GBSC3HBXCRBB Owner's Manual And Installation Instructions

Bottom freezer refrigerator models 20, 22, 23
Table of Contents

Advertisement

Available languages

Available languages

I tallati
I structi
efrigerator
Models 20, 22 and 23
Questions? Call 800.GE.CARES (800.432.2737} or Visit our Website
at: GEAppliances.com
In Canada, call 1.800.561.3344
or Visit our Website
at: www.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions
completelg
and carefullg.
• IMPORTANT - Save these
instructions
for local inspector's
use.
• IMPORTANT - Observe
all
governing
codes and ordinances.
• Note to Installer - Be sureto leavethese
instructions withthe Consumer,
• Note to Consumer - Keep these instructions for
future reference.
• Skill level -Installation
of this appliance
requires
basic mechanical
skills.
• Completion
time - Refrigerator
Installation
20 minutes
Water Line Installation
30 minutes
Proper installation
is the responsibilitg
of the
installer,
• Product failure due to improper
installation
is not
covered under the Warrantg.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator
will not fit through
a doorwag,
the refrigerator
door and freezer drawer
can be
removed.
• To remove the refrigerator
door, see Step 1 in
the Reversing the Door Swing section.
• To remove the freezer drawer, see the Removing
the Freezer Drawer section.
WATER SUPPLY TO THE ICEMAKER AND DISPENSER
(ON SOME MODELS}
If the refrigerator
has an icemaker, it will have
to be connected
to a cold water line. A GE water
supply kit (containing
tubing, shutoff valve, fittings
and instructions)
is available at extra cost from
gout dealer, by visiting our Website at
GEAppliances.com
(in Canada at
www.GEAppliances.ca)
or from Parts and
Accessories, 800.626.2002
(in Canada
1.888.661.1616).
15
TOOLS YOU MAY NEED
Adjustable Wrench
3/8" and 5/16" Socket
Ratchet/Driver
1/4" Outer Diameter
Compression Nut
and Ferrule (sleeve)
(icemaker models onlg)
Phillips Head Screwdriver
3/32",
1/8" and 3/16" Allen
wrenches
1/8" Drill Bit and
Electric or Hand Drill
Tope measure
Pencil
1/4" Nut Driver
Wire Cutters
Level

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents