Removing The Freezer Drawer; Remove The Basket; Remove The Drawer Front - GE GBSC3HBXCRBB Owner's Manual And Installation Instructions

Installation Instructions
REMOVING THE FREEZER DRAWER (on
some
models}
The freezer drawer can be removed, if needed,
to fit through tight areas.
Read these instructions completelg and carefullg.
_] REMOVE THE BASKET
r_ open the freezer drawer until it stops.
r_ The freezer basket rests on a frame inside the
freezer drawer. Lift the basket up at the back.
r_ Lift the front up and lift the entire basket up
and out of the drawer.
[_ REMOVE THE DRAWER FRONT
r_ Remove the screw on each side of the railing.
\
Screw
REMOVE THE DRAWER FRONT {cont.)
Lift up on both sides of the freezer drawer
handle to separate the drawer railings from
the rail assemblies.
Set the drawer front on a non-scratching
surface.
Push the rail assemblies back into locking
position.
Rail Assemblg Drawer
Assemblg
[_] REMOVE THE BASE GRILLE
(if needed}
If, after removing the freezer drawer and
refrigerator door, the refrigerator will still not
fit through a doorwag, the base grille can be
removed.
[_ Remove the base grille bg removing the
screws.
21