GE PTC22MFMALCC Owner's Manual And Installation page 30

Installation Instructions
REVERSING THE DOOR SWING (CONT.)
[] REHANG THE FREEZER DOOR
Lower the freezer door OllrO tim center hinge pin.
Center H in
Lift tim top hinge so the pin fits into the door socket.
Support the door on the handle side and make sure
tim door is straight and the gap between the doors is
even across the front. While holding the door in
place, tighten the top hinge screws.
To avoid scratching the corner cap, adjust the
bottom hinge pin so that there is a 1/16" (1.5 mm)
gap between the door stop and the top of tim door
corller cap.
Reinstall the top hinge cover.
1/16"
{1.5ram)
Gap
3O