GE JGRP20 Owner's Manual page 9

Power Failure
If a flashing time of day is in the d_lay,
you have experienced a power failure, Reset
the clock.
To reset the dock, touch the TIMER/CLOCK
pad and hold S seconds, Enter the correct
time of day by touching the ÷ or - pad,
Touch the STARTpad,
ge,gom
Thecontrolhas a series of tones that wilt sound at different times, Thesetones may sound while
you set the controlfor an oven function or at the end of the oven function, Theywill alsoalert you
when an incorrect time or temperaturehas been enteredor if there is a problem with the oven,
Tones While Setting the Control
V_q_enyou touch a touch pad you will hear
a beep, This beep will let you know you
have placed enough pressure on the pad
to activate it_
Attention Tone
Preheat Notification Tone
When you set an oven temperature the
oven automatically starts to heat _rhen the
temperature inside the oven reaches your
set temperature a tone _h_llsound to let you
know to place the food in the oven,
This tone _11 sound ffyou set an inwAid
fi.mction or try to set an additional figtction,,
The tone can be quickly identified by
watching the display messages_
9