GE JGRP20 Owner's Manual page 7

Usingthe oven controls.
OV IN CONTR _LS
geocom
OvenControl,Clockand TimerFeaturesand Settings
BAKEPOd
Touda this pad to select the bake function,
BAKE Light
Flashes while in edit mode--you can change
the oven temperature at this point, Glows
when the oven is in bake mode°
BROIL HI/LO Pad
Touch this pad to select the broil fimction,,
BROIL Light
Flashes while in edit mode--you can switch
from Hi to tO BROIL at this point. Glo_ when
the oven is in broil mode.
Oisptav
Shou_ the operations you have selected,
the time of day and the cookdng status°
O COOKING TIME Pad
Touch this pad and then touch the + or -
pad to set the amount of time you want
your food to cook. The oven M!I shut off
when the cooldng time has run out,
O DELAYSTARTPad
Use along with the COOKING TIMEor
SELFCLEAN pad to set the oven to start and
stop automatically at a dine you set,
O OVENLIGHTON/OFFPad
Touch this pad to mrn the oven light on
or off_
O TIMER/CLOCKPad
Touch this pad to select the timer feature.
Then touch +and -pads to adjust fime_
To set the dock, touch this pad twice and
hold 3 seconds and then touch the ÷ and -
pads, The time of dayMll flash in the
display when the oven is first mined on,
STARTPOd
Must be touched to start any cooking
function.
-Pad
Short taps to this pad will decrease the dme
or temperature by small amounts Touch
and hold the pad to decrease the dme or
temperature by larger amounts,
+ Pad
Short taps to this pad will increase the time
or temperature by small amounts, Touch
and hold the pad to increase the time or
temperature by larger amounts.
CLEAR/OFFPad
Touch this pad to cancel All oven
operations except the clock and dmer.
SELFCLEAN POd
Touch this pad to select the self_eaning
function, See the Using the self-cleaning
ovensection.
CLEAN Light
Hashes while in edit mode--you can change
the length of time for the serf-clean cycle at
tl_s p oint Glows when the oven is in the self-
clean cycle°After the self-clean cycle, the light
will turn off. Unlatch the door.
If "f- enda number o r letter"flashin thedisplay andthe
avoncontrol s ignals,this indicates a functionerrorcode
Touch theCLEA_OFF pad Allow theoventocoolforone
hour. P uttheovenbackintooperation.
If function errorcodarepeats, discannect powerto theoven
andcalf forservice