GE JGRP20 Owner's Manual page 11

ge,com
@
12-Hour, 24-Hour or Clock Black-Out
Your controlis.setto usea 12-hour ctock_
If you would prefer to have a 24-hour
military time clock or black-out flue dock
display, follow the steps below.
[]
Touch the BAKE and BROIL HI/LO
pads at the same time for 2 seconds
until the display shou_ SE
[]
Touch the tiMER/CLOCK pad once
The display will show 12 hr.
Touch the TIMER/CLOCKpad again to
change to the 24-hour military time
clock. The display x_lI show 24 hr_
Touch the TIMER/CLOCK pad again to
black-out the clock display. The display
x_l show OFF,
[] Touch the STARTpad to activate your
choice and leave the control set in this
special features mode
NOTE." If theclockis in theblack-out m odeyouwill
notbeable tousetheDelay Start function
_i i_i _ • •
:i
Control Lockout
Your c ontrolwill allow youto lockout thetouch
padsso theycannotbeactivated whentouched
To lock the controls:
[] Touch the BAKE and BROILHI/LO pads
at the same time for 2 seconds until
the display shows SF.
[] Touch the SELFCLEAN pad. The
display will show LOC OFF.
Touch the SELFCLEANpad again.
The display will show LOC
[] Touch the STARTpad to activate the
control lockout feature and leave
the control set in this special
features mode.
When this feature is on and the touch
pads are touched the control will beep
and the display will show LOC,
NOTE:Thecontrollockout modewill notaffect the
clock,timerandovenlighttouchpads
Fahrenheit or Centigrade Temperature Selection
Your ovencontrolisset to usethe Fahrenheit
temperature s elections b ut youmaychange this
to usethe Centigrade selections
[] Touch the BAKEand BROILHI/LOpads
at the same time for 2 seconds until
the display shows SF,
[]
Touch the BROIL HI/LO and COOKING
TIME pads at the same time for 2
[]
seconds, The display _afill s how F
(Fahrenheit),
Touch the BROILH_LO and COOKING
TIMEpads again at the same time for
2 seconds. The display will show C
(Centigrade).
[]
Touch the STARTpad
Changing the Speed of the ÷/- Pads
As youusethe+/- padswhensettinga timeor
temperature, youmaynoticethedisplaychanges
slowly This specialfeature allows youtochange
thespeed
To set the speed you prefer, follow the
steps below.
[]
Touch the BAKE and BROILHI/LOpads
at the same time for 2 seconds until
the display shows SF,
[] Touch the + pad. The display _l
show you a set speed between I and 5.
[] Touch the + pad to increase the speed
up to the number 5.r
[]
Touch the - pad to decrease the
speed dough to the number l
Touch the STARTpad to actuate the
setting and leave the control set in this
special features mode
II