Download Print this page

GE JGRP20 Owner's Manual page 24

Built-in
Hide thumbs Also See for JGRP20:

Advertisement

Using the self-cleaning oven.
After a Clean Cycle
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the
oven
COOLS.
If white spotsremain, r emove themwith a
soap.filled scouring padandrinsethoroughly
with a vinegar a ndwatermixture
These deposits are usually a salt residue that
cannot be removed by the dean cycle,
K the oven is not clean after one clean
cyde, repeat the cyde.
NOTES:
_You cannot set the oven for cooking until
the oven is cool enough for the door to
unlock,
K X_qailethe oven is self<leaning, you
can touch the CLOCK pad to display
the time of day To return to the
dean countdox_na, touch the COOKING
TIME pad,
if you have left the shelves in the oven
during the self-clean cycle and they
become hard to slide, apply a small
amotmt of vegetable oil or cooking oil to
a paper towel and wipe the edges of the
oven shelves _th the paper towel.
Questions and Answers
Q. If my oven clock is not set to the
correct time of day, can I still
self-clean my oven?
A. If the clock is not set to the correct
time of day you will not be able to
set a delay-clean cycle to end at a
specific dme,
Q. Can I use commercial oven cleaners
on any part of my self-cleaning
oven?
A. No cleaners or coatings should be
used around any part of this oven.
tfyou do use them and do not
thoroughly
rinse the oven with water,
wiping it absolutely clean afterwards,
the residue
can scar the oven surface
and damage metal parts the next time
the oven is automatically cleaned,
Q° What should I do if excessive smoking
occurs during cleaning?
A. This is caused by excessive soil Turn
the oven off Open the _ndows
to
rid the room of smoke. Wait until
the oven has cooled and the words
"LOCKED DOOR" are off in the
display. Wipe up the excess soil and
reset the clean cycle.
Q. Is the "crackling"
or "popping"
sound
I hear during cleaning normal?
A. Yes. This is the sound of the metal
heating
and cooling during both the
cooking and cleaning
functions.
Q. Should there be any odor dttring the
cleaning?
A. Yes, there will be an odor during the
first few cleanings.
Failure to wipe
out excessive soil might also cause
a strong odor when cleaning,
Q. What causes the hair-like lines on the
enameled surface of my oven?
A. This is a normal
condition,
resulting
from heating
and cooling during
cleaning. These lines do not affect
how your oven performs
Q. Why do i have ash left in my oven
after cleaning?
A. Some types of soil will leave a deposit
which is ash, It can be removed with
a damp sponge
or cloth.
Q. My oven shelves do not slide easily,
What is the matter?
A_ Kyou have left the oven shelves in
the oven during
many cleanings,
the shelves _611lose their luster and
become hard to slide To make
shelves slide more easily wipe the
sheK supports
with cooking oil.
Q. I have left my oven shelves in the
oven during the self-clean cycle and
they have become gray_ Is this
normal?
A. Yes. After the self-clean cycle, the
shelves _a_lllose some luster and
discolor to a deep gray color°
24

Advertisement

loading