Omnimount Lift 42 Instruction Manual page 6

Assemble lift mechanism and connect the TV to be used in the
install to determine dimensions for the lift enclosure prior to
construction. Be sure to leave room for adjustments If
necessary. An out of cabinet assembly of the mechanism can
be done using steps 1,4,6,8,9 and 10 in order.
(W)
(H)
Minimum INTERIOR Dimensions
(W) Minimum Width
This will allow 1 " of clearance on either
side of the television.
Before Enclosure Construction!
(D)
Width of TV + 2"
(W + 2")
(H + 2")
position or Height of TV + 2"
longer rails spacers will be
needed above and below the
(D) Minimum Depth
Depth of TV + Depth of
Be very careful not to build
the enclosure too shallow.
The mount may not function
or damage to the TV could
(D + 2")
(H) Minimum Height
Height of lift in closed
NOTE: For use with the
lift mechanism
Mount + 2"
occur
6