Appendix - E-Mail Alert Function> 92 - Olivetti d-Color P20W Network User's Manual

A
PPENDIX
The following table explains how to set up the E-Mail Alert
function via Telnet.
7: Setup SMTP
(E-Mail)
– E-M A
AIL
1: SMTP
Transmit
2: SMTP
Receive
3: SMTP
Server
Name
4: SMTP Port
Number
5: E-mail
Address
6: Reply-To
Address
7: Destination
Address1–
11:Destination
Address 5
Appendix – E-Mail Alert Function> 92
F
LERT UNCTION
1: To Address
1–5
2: Modify mode
3: Check time
(hours)
Set sending E-Mail
via SMTP, enabled or
disabled.
Set receiving E-Mail
via SMTP, enabled or
disabled.
Set IP address or
host name of SMTP
server.
Set port number of
SMTP.
Set the E-Mail
address used for
[From] field in the
mail header.
Set the E-Mail
address used for
[Reply-To] field in the
mail header.
Up to five E-Mail
addresses to which E-
Mail alerts can be
sent.
Select how to notify
warnings/errors via
E-Mail.When any
specified status
changes, E-Mail is
sent immediately if
"EVENT" is selected,
or periodically if
"PERIOD" is selected.
Set duration (1-24
hours) to send E-Mail
when you select
"PERIOD" as Notify
mode.