Advertisement
HAZARD
RISK
OF HOT SURFACES
I
JI
WHAT CAN HAPPEN
HOW TO PREVENT
IT
• Contact with hot surfaces, such as
• During operation, touch only the control
engines exhaust components,
could
surfaces of the pressure washer.
Keep
result in serious burn.
children away from the pressure washer
at all times. They may not be able to
recognize the hazards of this product.
HAZARD
RISK OF INJURY AND PROPERTY
DAMAGE WHEN TRANSPORTING
OR STORING
WHAT CAN HAPPEN
HOW TO PREVENT
IT
• Fuel or oil can leak or spill and could
result in fire or breathing hazard, serious
injury or death can result. Fuel or oil
leaks will damage carpet, paint or other
surfaces in vehicles or trailers.
If pressure washer is equipped with a
fuel shut-off valve, turn the valve to the
off position before transporting
to avoid
fuel leaks. If pressure washer is not
equipped with a fuel shut-off valve, drain
the fuel from tank before transporting.
Only transport
fuel in an ©SHA approved
container. Always place pressure washer
on a protective
mat when transporting
to
protect against damage to vehicle from
leaks. Remove pressure washer from
vehicle immediately
upon arrival at your
destination.
The powerful spray from your pressure washer is capable of
causing damage to surfaces such as wood, glass, automobile
paint,
auto striping and trim, and delicate objects such as flowers
and shrubs. Before
spraying, check the item to be cleaned to assure yourself that it is strong enough to
resist damage from the force of the spray. Avoid the use of the concentrated
spray
stream except for very strong surfaces like concrete and steel.
Operating without flow of water will result in equipment damage.
Operating the
pressure washer with water supply shutoff will void your warranty. You should never
run this pressure washer for more than 2 minutes without pulling the trigger to allow
cool water to enter the pump and the heated (recirculated) water to exit.
7- ENG
D25852
Advertisement
