Advertisement
8.
Turn fuel valve to the ON
position, 1/4 turn
counterclockwise.
9.
Move the choke control lever to
the CHOKE ON N position and
the throttle control to the FAST
'_
position. NOTE: No choke is
needed to start a warm engine.
10. Pull starter grip slowly until you
feel resistance, then pull briskly.
Return starter grip gently. Pull
rope with a rapid full arm stroke.
Let rope rewind slowly. Repeat if
necessary.
If the engine does
not start after two
pulls, pull the trigger to relieve the
pressure.
11. If the choke was used to start
the engine, move the choke lever
to the OFF position.
12. Depress trigger on gun to start
water flow. Release trigger to
stop water flow.
13. Adjust nozzle spray for the task
being performed. See How To
Use Wand instructions
in this
section.
DO NOT let hoses
come in contact
with very hot engine muffler during
or immediately
after use of your
pressure washer.
hV_ V_41 _lad =1 _V_4 _ [_]_
WHEN PERFORMING
MAINTENANCE,
YOU MAY BE
EXPOSED TO HOT SURFACES, WATER PRESSURE,
MOVING PARTS, OR FIRE RESULTING IN DEATH. BEFORE PERFORMING
ANY MAINTENANCE
OR REPAIR, DISCONNECT
SPARK PLUG WIRE, LET
ENGINE COOL AND RELEASE ALL WATER PRESSURE. THE ENGINE
CONTAINS FLAMMABLE
FUEL. DO NOT SMOKE OR WORK NEAR OPEN
FLAMES WHILE PERFORMING
MAINTENANCE.
To ensure efficient operation and longer life of your pressure washer, a routine
maintenance schedule should be prepared and followed. If the pressure washer
is used in unusual conditions, such as high-temperatures
or dusty conditions,
more frequent maintenance checks will be required.
D25852
1 4- ENG
Advertisement
